Search:

DC Boarduino

17.70 EUR*

*inc. VAT 19,6% and 0.20 EUR for green tax

Manufacturer

Adafruit Industries, USA.

Licences

Hardware: CC BY-SA 2.5

Software: CC BY-SA 2.5

Schematics: CC BY-SA 2.5

Hackability Level

high, the perfect hackable device, you can do what you want with it

Average Rating

If you've ever struggled to use a solderless breadboard with an Arduino, you understand how frustrating it can be! "Lady Ada" designed this Arduino clone to solve this problem in an inexpensive DIY fashion.

The Boarduino is an Arduino clone: when programmed with the Arduino bootloader, it can talk to the Arduino software and run sketches just like the original.

There are noticable differences between the Boarduino and the Arduino.

Shields cannot be used as the form factor is so different
For the DC version there isn't an on-board USB chip. This means you need to use a USB-TTL cable or a MiniUSB (or any other FTDI breakout board) which is not included. There are also no rx/tx LEDs and no rx/tx 1K series resistors.
16.00 MHz ceramic resonator is used instead of crystal, so cycle speed may be off by +- 0.3nS (0.5%). This isn't relevant for UART timing, servo drivers, PWM, etc. but could be an issue if you need nanosecond-precision timing. Note that the Arduino software only provides millisecond-precision timing for general sketches (1 second = 1000ms. 1ms = 1,000,000 ns)

The specifications for the DC boarduino include:

Designed to plug into a breadboard for easy prototyping
Petite size, only 3" x 0.8" (75mm x 20mm)
All 'standard' pins are brought out - Digital 0 thru 13, Analog 0 thru 5, ARef, 5V, Ground, Vin and Reset
2 LEDs, green power and red "pin 13" LED just like the Arduino Diecimila
Standard Reset button
ATmega328P, running at 16.00 MHz, just like the latest Arduino, the Duemilanove
6-pin standard ICSP header
Standard 2.1mm DC jack (just like the original Arduino) with 5V regulator to run on 7V-17V power (DC)
USB or External power, selectable with a jumper (just like original Arduino)
1N4001 diode protects against using incorrect wall adapter
6-pin header at the end for a USB-TTL cable
Auto-reset capability when used with a USB-TTL cable
Available as a low cost kit with standard parts, so its never out of stock
All through-hole parts are easy to solder