Search:

USB Tiny ISP V2.0

22.19 EUR*

*inc. VAT 19,6% and 0.20 EUR for green tax

Manufacturer

Hardware: CC BY-SA 2.5

Software: CC BY-SA 2.5

Schematics: CC BY-SA 2.5

high, the perfect hackable device, you can do what you want with it

Easy to make

Kit comes with both 6-pin and 10-pin AVR-standard connectors and cables. Almost no programmers that are not from Atmel have both! (Including the AVRISP v2)
Easy to build: All through-hole parts, all common and available from large distributors

Easy to use

AVRdude compatible - support for usbtiny added in v5.5!
USB drivers available for Windows using libusb, no drivers needed for Mac OS X or Linux.
Durable off-the-shelf enclosure
High speed! Max clock rate is 400KHz. Write speed:1Kb/s, read speed: 2Kb/s. (Atmega8 takes 8s to write, 4s to read/verify)
2 LEDs to indicate "USB/Power good" and "Busy"
I/O is buffered to allow programming of 2V-6V targets

Easy to power

Powered off of 5V USB bus at less than 100mA to allow it to be used with unpowered USB hubs
Easily accessable jumper to power target project off of USB (target must be 5V tolerant, of course)
Remove the jumper and it will self-power but buffer the I/O to match the target device.

Easy to extend

Easily interfaced with libusb
Existing firmware allows for fast SPI interfacing using USB
Bit-bang commands provide 8 bits of I/O control (including LED) for open-ended project ideas

All the firmware code is distributed under the GPL, the hardware design layout files are CC 2.5 Attrib./Share-alike

Size	67mm x 42mm x 24mm
Weight	43.5 g
Interface	USB B - Standard 6 and 10-pin AVR headers
v2.0 Firmware		download
Schematic and board files	for Eagle CAD.	download
Schematic image		download